Skort Stack 2010 ~ the skegging morph

Welcome back to garment sewing! Yes, it has been really quilty around here lately, but it's time for a little wardrobe sewing. Remember last years skort stack? Well maybe you don't, but it's that time of year again, the weather has been improving and giving us faint hints that spring and possibly summer might be around the corner which means that I need to get my backside in gear and get going on some summer sewing. My daughter once again needs camp clothes, so here we go - skort stack 2010. I promise, I'll get to the skeggings in a bit.

I received so many questions and inquiries on last years skorts, that I decided to do a full-blown tutorial for this years version. Hopefully, you will be able to take these instructions and turn them into skorts of your very own.

First off, we'll need to make some basic decisions about the sizing of the garment. You'll need to get a waist, hip and length measurement. The length is really up to you, whatever length you prefer to see on your child. Some people like their skirts long and some like them shorter, so it's really just up to personal preference.

Here is the basic layout of the skirt
I will be doing a basic 2 tiered skort, but you can mix it up and add tiers if you like. Completely up to you. This post shows several examples of different styles.
My measurements are for a size 12 this time around ~ for this size you'll need about 3/4 of a yard of woven fabric for the skirt part and a remnant of rib knit or cotton lycra fabric for the waistband. You could probably use cotton jersey, but I don't recommend it - you want some knit fabric with stretch. Here's a good primer on different knit fabrics if you are unsure. And most of all, do not be afraid of the knit! Totally do-able fabric. Really! Let's check it out ~

ETD: If you are sewing with knits - use a serger, if you have one, following the directions in this post. If you don't have a serger, use a 3-stitch zigzag or regular zigzag on a sewing machine for any seams that don't have a woven fabric in them. If you are sewing a knit onto a woven, you can just use a straight stitch.

Measurements

When I add in seam allowances, this translates to cut pieces that measure:

Waistband ~ 4.5" wide by 26" long

Top tier ~ 3" wide by 37" long
Bottom tier ~ 12.5" wide by 75" long (cut 2x width of fabric if it is 45" wide and then trim to 75" after sewing)
I have allowed about 10" of ease all the way around for the hip measurement - this is a pretty full skirt. If you don't want it as full you can do less ease.

Notice that the bottom tier is approximately twice as long as the top tier. There is a reason for this I'll get to later. Also, the top tier is approximately 1/4 of the width of the bottom one. You want approximately the same proportions in yours. Sometimes it's easier to figure out what length skirt you would like - then divide up your sections by making the top tier 1/4 of that measurement and the bottom tier is therefore 3/4 of the measurement in determining the width of your tiers. This approach should work for just about any child size garment.

Seam allowances are 1/2" and included on my measurements.
Shorts are inserted into the skort at the waistband application point. I don't have a short pattern I can share with you because I usually just use pre-made patterns for ease. If you have one already that fits, go for it. If you want to draft your own, there are many excellent tutes on how to do that here, here, and here so I won't go over that part. You will need a simple elastic waist short pattern for this project. This year, I've decided to go with a knit bicycle-type short instead of a woven short but either type will work fine for this project.

Ok on to sewing ~
First off, sew the top tier into a loop, right sides together like so:

Sew the 2 pieces of the bottom tier together and then trim the total length to 75".

Then sew the bottom tier piece into a loop like you did for the top tier. It's a loop I promise (even if you can't see it really well).
At this point I do something completely unorthodox and I hem the skirt. I find it a lot easier to press and hem before the ruffles go in and I already know that my length will work but if you aren't sure about your sizing - you should probably wait and do this part last. To add the hem, I press up the bottom edge of the fabric 1/4" and iron.

Then I fold the edge over again another 5/8" and press.

Topstitch the hem in place.

Now it's time for some ruffling. I like to use my handy dandy beloved ruffler.

If you don't have a ruffler, don't worry. It isn't something you need to have for this project, but if you plan to sew a lot of ruffles in your future, then you might want to add this to your wish list. Ok, moving on. We are going to ruffle the upper (non-hemmed) edge of the bottom tier. Remember that the bottom tier is supposed to be twice the length of the top tier? That's because we will set the ruffler at 50% - so it ends up ruffling the piece to exactly half it's original length. That way, it fits nicely onto your top tier in assembly. If you are without a ruffler, you can just run a couple of lines of basting stitches along the edge of the fabric and pull on those basting threads carefully to gather up the fabric until it is the same length as the top tier. Another option is the zig zag or dental floss method which Sandi Henderson (Portabellopixie) did a great job of explaining.

Ok, now that we are newly ruffled, the top tier should fit nicely onto the bottom tier. Take the top tier and place it over the bottom tier with the right sides facing and lining up the edges.

You can pin it in place if you want to. Now sew those 2 pieces together using a 1/2" seam allowance. At this point, I serge my seams, but if you don't have a serger, just sew the seam with a regular straight stitch and then go over the edge of that seam w/ a zigzag stitch to prevent fraying in the wash.

Then topstitch over the seam on the outside as shown.

Set this whole piece aside for now.

At this point we need a pair of shorts to insert, so I'm going to sew mine together, finishing everything except the waistline.

Now grab the shorts and insert them into skirt with the right sides of the shorts facing the wrong side of the skirt. Line up the top edges and make sure that the back of the skirt (usually where the seam of the top tier is) is lined up with the back of the shorts (usually the back of the shorts are a bit longer than the front). Pin or baste into place. Set aside.

Take the knit waistband piece and sew it into a loop along the sort edge just as the you did for the top tier piece.

Ok technically here you should use a ballpoint needle on a knit fabric. But I'm lazy and don't want to switch back and forth between ballpoint and sharps since I'm also sewing on a woven fabric, so I just don't bother. I have never had a skort fall apart or otherwise be damaged as a result of this massive faux pas - take a deep breath and all will be ok. Really! Set the waistband aside for now.

Take the 1" elastic and measure the correct size for your recipient. Mine is going to be 26" long. Usually, I just cut the elastic the same length as the waist measurement and then overlap the ends about an 1/2-1". This makes it a bit narrower than the waist, but keeps things tight enough to prevent falling off. Sew the elastic into a loop taking care not to twist before sewing.

Ok we are almost done. Take the skort and place the knit waistband over the skort with the right sides facing, pin in place.

Remember to line up the back of the waistband (seam) with the back of the skort.

Take the elastic loop and place that over the knit waistband and then fold up the knit fabric in half so that it encases the elastic like so.

Now we are going to sew the waistband on. The waistband stretches, since it's a knit, so you should be able to ease it onto the woven skort with no problems. Just pin all around and then stitch it into place, gently stretching the knit fabric to fit the skort.

Fold up the waistband so that it sits like it would when worn. Fold the seam allowance down towards the woven fabric and topstitch along the top edge of the skort fabric like so

And that is it people! We are done! (Sometimes I channel Junie B Jones)

Then make a bunch more!

Doesn't it look fab!! Yes, I think it does!

Ok I know I mentioned skeggings. Can you see where this is going? The only real difference between skeggings and skorts is the length of the shorts - or in the case of skeggings it's more of a legging instead. As for the word skeggings, I have no idea where the term came from. I'll leave you to sort that out.

This pair kind of happened by accident.

Ya' see, I had left my shorts a bit long since it was an untested pattern and I had planned to trim them later after fitting. When my daughter tried them on she loved them that way and begged for more. Hmm ok, so the skeggings were born.

Just goes to show you that there are no rules to this. I hope you enjoy your new garments, whether they be in the form of skeggings or skorts or both!

Tune in tomorrow for yet another skort variation.
Happy Sewing!

Pillow Talk Swap beings

Pillow {Talk} Swap round 3 has just begun. I'm kind of excited about this because it's the first swap I've ever done and perusing the samples of previous rounds makes you realize you are in the company of some great artists over there. Heather and Kerri run this flickr group/swap and they are awesome gals and quilters not to mention the many other prominent group members. Should be a ton of fun. Partners have not yet been assigned but I'm already milling over possible design ideas. My own pillow inspiration picture

~ it was tough to narrow it down because I'm pretty much inspired by everything. I can't wait to get started on this. I'll keep you guys posted on my progress.

Meanwhile, over in hexie-land, some new block options have been posted. I have pretty much already posted all of mine and I'm pretty caught up at this point. I'm not going to do the rad-ar love block, so that just leaves the basic hexie which I like and am sticking with. I'll update progress on this as I go.

Until next time, happy sewing!

Ode to volumes

Happy Monday and welcome to my purse sewing turned garment sewing turned quilting blog. Ha! That just shows you the sewing journey I've been on over the past 2 years since I started this blog. If you are not a quilter, rest assured that I will eventually return to garment sewing, but for now you will have to indulge me while I get this quilting bug out of my system.


So here is my latest quilt. To the best of my knowledge, this quilt is representative of a string quilt except that string quilts are often paper/foundation-pieced and this type is not usually. Now, as you all know, I'm a newbie quilter and by no means an expert on anything quilty, so I could be entirely mistaken. But I've searched and searched and aside from just stacks of strips, this style of quilt is a string quilt. Someone please correct me if I'm wrong. Anyway, suffice it to say, that I have been drawn to this simple free-spirited style for quite some time and I thought it was time to tackle one of my own.


This quilt design, if you can call it that, is one of my own. I liked the stacked 'string' look but didn't want to go any further and cut the strips as you might do for a blocked string quilt. I wanted 3 stacks of strips with solid in between the stacks and I'm calling this my 'ode to volumes' quilt because it was inspired by Anna Maria Horner's volumes fabric which I adore and have used before.


The solid coordinate was Kona in Herb and the patterned fabric was a mixture of different blues and aquas that compliment my living room and include, Jessica Levitt's Timber, Amy Butler's daisy chain, Denyse Schmidt's Hope Valley, and a variety of other coordinating fabrics.

The stacked strips actually repeat once in each 'pile' and therefore the quilt was sewn in 6 sections or very large blocks. The whole thing was bound in Amy's butlers daisy bouquet in forest and I used the Kona Herb on the back with some leftover strips thrown in to widen the backing.

(sorry about all the horrible lighting, it's raining in Oregon, again, and if I have to wait for a sunny day, I'm going to be waiting a long time)

I'm really happy with the result and I have enough Timber fabric left over to create something else... what to do? I guess I'll come up with something.

While I was researching what to call this design, I found quite a few lovely examples of this type of quilt, but no representative flickr group. I'm an organization junkie, so I decided this 'category' of quilts needed a group to call it's own. So we now have the Stacked Strip quilts flickr group. This is a public flickr group to which anyone can contribute. If you have or know of a picture that belongs in this pool, please add it. It's in the sidebar too, so you can find it at any time.

Happy Sewing!